2600 -TS Automatic Edge Banding Machine

CONTROL SYSTEMS: 

Controls of all operating units such as opening- end cutting, half concave milling, thin-thick pvc automatic pass,  High frequency motors are controlled by convertors and includes emergency switches. Electronic systems are lidded and sealed to protect from dust etc. environments.

MAIN CHASSIS:

which is covered with rubber patented to HAKİ SABIR grips narrow and big parts.. It is the shortest machinery of all class produced for monobloc steel and measured accurately to provide maximum smoothness, right settings and exact contact to the ground.

FEEDER: Designed in such a way that edge bandings shall be loaded from large scaled carrier bobbins.

FEEDER AND OVERPRINTING:

Rubber covered  pallet system comprises of polyamide and rubber pallets that are connected to jointed chains over accurate processed steel bed.

GLUE SPREADING: 

 hot-melt glue melting and spreading and operating independent from pallet. For heat control, 2 pieces thermostat and 2 pieces steel cracker heated.

ROLLING & CUTTING:

Step Motor Pvc Driver cutting & pulling system patent of which belongs to HAKİ SABIR, has the capacity of cutting the edge banding materials up to 10 mm thickness and 50 mm height. It does not require any adjustment in change over from thin material to thick material.measurement of quantities

PRESSİNG ROLLERS: 

The  comprises of 2 rollers.

(Magic) Head & End Flat &Radius Cutting-Top Trimming Head &End Corner Trimming :

The system patented to HAKİ SABIR, is start, end and upper processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

(Magic) Bottom Trimming Head &End Corner Trimming- :

The system patented to HAKİ SABIR, is start, end and sub processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

SCRAPING GROUP:

(OPTIONAL) It is the only scraping unit which is patented to HAKİ SABIR, independent from each other, upper and lower radius,

SOLVENT  SPRAYING:

It sprays the liquid that is used for cleaning of glue and polishing of banding surface.

POLISHING GROUP:

It carries out the glazing and polishing the banding surface with the help of solvents, two separate 1500 d/min motors.

SAFETY SYSTEMS:

The electro pneumatic accessories of the machinery carries out the automatic cleaning of oils during operational period; in the event that phases and air are not enough, machinery protects itself and prevents the damage to its systems. Part controls the feed interval and notify about the malfunction .