Minifix- 4600 Automatic Edge Banding Machine

With Drilling Unit- (Product Was Invented First Time İn The World )'
Fast, High Performance and Economical...
Minifix- 4600 Edge banding machine which is plc controlled, colored touch screen and with its innovative, has ergonomic structure and the fastest, shortest and easy to be used system and design is patented to HAKİ SABIR is designed for PVC, foil, lining melamine and abs applications thickness of which is from 0.4 mm up to 3mm for workshops, factories and outsourcers with its highest quality.

Category:
  •  Systems that are used over years are patented to HAKİ SABIR
  • Double pallet system covered with rubber for gripping narrow and big parts
  • Height adjustment and centering is carried out with automatic lifting system
  • With Drilling Unit- (Product Was Invented First Time İn The World )
  •  Pre Milling Unit(Jumping)
  • Plc controlled colored touch screen and touch screen setting application.  Pre-Melting System
  •   Step Motor Pvc Driver
  •  Thin-thick pvc automatic pass
  • Automatic pricing, item counting and measurement of quantities
  •   Side press that does not apply pressure to patented front and rear overplus
  •   Fast and easy setting and installation.
  •   Patented manufacture system, stabilized hard monobloc structure and high product quality..
  •   Patented cutting systems, minimized nonvibration operation
  •   Wide pallet, interlaced chain.
  •   Nonproblematic equipment, machinery safety systems, 2 years warranty.

CONTROL SYSTEMS:

Controls of all operating units such as opening- end cutting, half concave milling, thin-thick pvc automatic pass, normal soft mdf, item counter, quantities meter, pricing are carried out over plc colored touch screen. High frequency motors are controlled by convertors and includes emergency switches. Electronic systems are lidded and sealed to protect from dust etc. environments.

 

MAIN CHASSIS: 

Double pallet system which is covered with rubber patented to HAKİ SABIR grips narrow and big parts.. It is the shortest machinery of all class produced for monobloc steel and measured accurately to provide maximum smoothness, right settings and exact contact to the ground.

 

FEEDER:

Designed in such a way that edge bandings shall be loaded from large scaled carrier bobbins.

 

FEEDER AND OVERPRINTING:

Rubber covered double pallet system comprises of polyamide and rubber pallets that are connected to jointed chains over accurate processed steel bed. Height adjustment and centering is carried out with automatic lifting system.

 

Pre Milling Unit (JUMPING): 

The system patented to HAKİ SABIR provides the proper process of two pieces ball blade; improperly cut slat, mdf, melamine coated chipboard with hopping, jointly and separate operational features.

 

GLUE SPREADING: 

Innovative Pre-Melting Glue Tank System Consume Less Than 70 % Glue & Electric Compared To Other Edge Banders.It comprises of hot-melt glue melting and spreading and operating independent from pallet. For heat control, 2 pieces thermostat and 2 pieces steel cracker heated.

 

ROLLING & CUTTING:

Step Motor Pvc Driver cutting & pulling system patent of which belongs to HAKİ SABIR, has the capacity of cutting the edge banding materials up to 10 mm thickness and 50 mm height. It does not require any adjustment in change over from thin material to thick material.

 

PRESSING ROLLERS: 

The proximity switch and plc controlled pneumatic system patented to HAKİ SABIR comprises of 3 rollers. Being gripping drive, the initial pressing carries out pressing settings automatically. This is the only machine that does not apply pressure to the overplus that are in front and rear part of the material to be glued.

 

(Magic) Head & End Flat &Radius Cutting-Top Trimming Head &End Corner Trimming : 

The system patented to HAKİ SABIR, is start, end and upper processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

 

(Magic) Bottom Trimming Head &End Corner Trimming- :

The system patented to HAKİ SABIR, is start, end and sub processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

 

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

 

SCRAPING GROUP: 

It is the only scraping unit which is patented to HAKİ SABIR, independent from each other, upper and lower radius, pneumatic and does not lead to blockage, by-pass. Can carry out automatic adjustment from 0.40 mm up to 2 mm.

 

SOLVENT  SPRAYING:

It sprays the liquid that is used for cleaning of glue and polishing of banding surface.

 

POLISHING GROUP:

It carries out the glazing and polishing the banding surface with the help of solvents, two separate 1500 d/min motors.

 

With Drilling Unit- (Product Was Invented First Time İn The World )–controlling operation of each different eyelet& working in order & Leaning shields for hole size sensitivity& Double pallet system preventing the workpiece from bending during operation & plc and pneumatic system for automatic start (Minifiks 4600 and cnc machine with three personnel, prepares 5,6 kitchen packaging, 5-6 chipboard on average is used for a kitchen and this makes 30-36 chipboards and approximately be 25-30 meters of pvc work. It is another avantage that sizes coming to subcontracting firms do not need various perforating machine sizing etc. Other machines.)

 

Grooving With Angled Jumping (Optional)    : Sloped jumping input-output distance can be adjusted from plc colored touch screen.  The diameter of saw is 80 X 4 mm (ops)

 

SAFETY SYSTEMS:

The electro pneumatic accessories of the machinery carries out the automatic cleaning of oils during operational period; in the event that phases and air are not enough, machinery protects itself and prevents the damage to its systems. Part controls the feed interval and notify about the malfunction on the plc colored touch screen.

Şebeke Gerilimi Electrical Level Напряжение 380-220 / 50 hz-380-220 В / 50 Гц
Nominal Akım Nominal Current Номинальный ток 20 A-20A
Bant Kalınlığı Edge Material Thickness Толщина кромки 0,4-3 mm-0,4-3 мм
İş Parcası Kalınlığı Board Thickness Толщина детали 10-50 mm-10-50 мм
Çalışma Hızı Speed Cкорость 15 m/dk-15м/мин
Toplam Elektrik Total Electrical Power Энергопотребление 13 Kw-13 кВт/ч
Toplam Hava Total Air Pressure Общее давление воздуха 6 Bar-6 Бар
Hava Tüketimi Total Air Usage Потребление воздуха 180 lt/dk-lt/min-180 л/мин
Ön Freze Front Milling Мощность двигателя передней фрезы 1 X 2,2 kw/ 12000 Rpm-1 X 2,2 кВт/ 12000 об/мин-1 X 1.5, kw/ 12000 Rpm-1 X 1,5 кВт/ 12000 об/мин
Trim Freze Trimming Мощность двигателя торцовочного агрегата 2 X 0,75 kw / 18000 Rpm-2 X 0,75 кВт/ 18000 об/мин
Polisaj Motoru Buffing Motor Мощность двигателя полировального агрегата 2 X 0,18 kw / 6000 Rpm-2 X 1 кВт / 6000 об/мин
Minifiks Motoru Minifix Motor   2 X 1 kw / 1310 Rpm-2 X 0,18 кВт / 1310 об/мин
Tutkal Kazan Motoru Glue Boiler Engine  Мощность двигателя клеевой станции 0.18 kw / 850 Rpm-0.18 кВт / 900 об/мин
Pvc Step Motor Pvc Step Engine   0.4 kw-0.4 кВт
Çift Palet Motorları Double pallet system  Мощность двигателей подающих транспортеров 2 X 0.75 kw / 1404 Rpm-2 X 1.1 кВт / 1404 об/мин
Makinenin Uzunluğu Machine Length Длина станка 4600 mm-4600 мм
Makinenin Genişliği Machine Width Ширина станка 800 mm-800 мм
Makinenin Yüksekliği Machine Height Высота станка 1500 mm-1500 мм
Makinenin Ağırlığı Machine Weight Вес станка 1200 kg-1200 кг