2600 -NC-PUR Automatic Edge Banding Machine

Fast, High Performance and Economical...
2600 -NC-PUR Edge banding machine which is plc controlled, and with its innovative, has ergonomic structure and the fastest, shortest and easy to be used system and design is patented to HAKİ SABIR is designed for PVC, foil, lining melamine and abs applications thickness of which is from 0.4 mm up to 3mm for workshops, factories and outsourcers with its highest quality.

Category:
  •   Systems that are used over years are patented to HAKİ SABIR
  •   Pallet system covered with rubber for gripping narrow and big parts
  •   Height adjustment and centering is carried out with automatic lifting system
  •   Plc controlled  setting application.
  •   Pre-Melti ng System
  •   Step Motor Pvc Driver
  •   Thin-thick pvc automatic pass
  •   Side press that does not apply pressure to patented front and rear overplus
  •   Fast and easy setting and installation.
  •   Patented manufacture system, stabilized hard monobloc structure and high product quality..
  •   Patented cutting systems, minimized nonvibration operation
  •   Wide pallet, interlaced chain.
  •   Nonproblematic equipment, machinery safety systems, 2 years warranty.

CONTROL SYSTEMS: 

Controls of all operating units such as opening- end cutting, half concave milling, thin-thick pvc automatic pass, normal soft mdf, item counter, quantities meter, pricing are carried out over plc colored touch screen. High frequency motors are controlled by convertors and includes emergency switches. Electronic systems are lidded and sealed to protect from dust etc. environments.

 

MAIN CHASSIS:

which is covered with rubber patented to HAKİ SABIR grips narrow and big parts.. It is the shortest machinery of all class produced for monobloc steel and measured accurately to provide maximum smoothness, right settings and exact contact to the ground.

 

FEEDER: Designed in such a way that edge bandings shall be loaded from large scaled carrier bobbins.

 

FEEDER AND OVERPRINTING:

Rubber covered  pallet system comprises of polyamide and rubber pallets that are connected to jointed chains over accurate processed steel bed. Height adjustment and centering is carried out with automatic lifting system.

 

GLUE SPREADING: 

Innovative Pre-Melting Glue Tank System Consume Less Than 70 % Glue & Electric Compared To Other Edge Banders.It comprises of hot-melt glue melting and spreading and operating independent from pallet. For heat control, 2 pieces thermostat and 2 pieces steel cracker heated.

 

ROLLING & CUTTING:

Step Motor Pvc Driver cutting & pulling system patent of which belongs to HAKİ SABIR, has the capacity of cutting the edge banding materials up to 10 mm thickness and 50 mm height. It does not require any adjustment in change over from thin material to thick material.

 

PRESSİNG ROLLERS: 

The proximity switch and plc controlled pneumatic system patented to HAKİ SABIR comprises of 2 rollers. Being gripping drive, the initial printing carries out printing settings automatically. This is the only machine that does not apply pressure to the overplus that are in front and rear part of the material to be glued.

 

(Magic) Head & End Flat &Radius Cutting-Top Trimming Head &End Corner Trimming :

The system patented to HAKİ SABIR, is start, end and upper processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

 

(Magic) Bottom Trimming Head &End Corner Trimming- :

The system patented to HAKİ SABIR, is start, end and sub processing system which is easy to use, single movement with single blade, can process on the 3 faces of part and does not give harm to the part on the nodular steel cast chassis. The diameter of the blade is 42 mm. It automatically carries out the passes of perpendicular corner soft, post and flat parts from 0.40 mm up to 2 mm.

 

The connection which eliminates the problem of distortion of settings due to heating up, the system which vacuums dust and sawdust, working with 18000 d/min velocity external air-cooled 300 Hz motors.

 

SCRAPING GROUP:

(OPTIONAL) It is the only scraping unit which is patented to HAKİ SABIR, independent from each other, upper and lower radius,

 

SOLVENT  SPRAYING:

It sprays the liquid that is used for cleaning of glue and polishing of banding surface.

 

POLISHING GROUP:

It carries out the glazing and polishing the banding surface with the help of solvents, two separate 1500 d/min motors.

 

SAFETY SYSTEMS:

The electro pneumatic accessories of the machinery carries out the automatic cleaning of oils during operational period; in the event that phases and air are not enough, machinery protects itself and prevents the damage to its systems. Part controls the feed interval and notify about the malfunction .

Şebeke Gerilimi Electrical Level Напряжение 380-220 / 50 hz-380-220 В/ 50 Гц
Nominal Akım Nominal Current Номинальный ток 18 A
Bant Kalınlığı Edge Material Thickness Толщина кромка 0,4-3 mm
İş Parcası Kalınlığı Board Thickness Толщина детали 10-50 mm
Çalışma Hızı Speed Cкорость 10 m/dk-10 м/мин
Toplam Elektrik Total Electrical Power Энергопотребление 3 Kw -3 кВт/ч
Toplam Hava Total Air Pressure Общее давление воздуха 6 Bar- 6Бар
Hava Tüketimi Total Air Usage Потребление воздуха 160 lt/dk-lt/min-160 л/мин
Polisaj Motoru Buffing Motor Мощность двигателя полировального агрегата 2 X 0,18 kw / 1310 Rpm-2 X 0,18 кВт / 1310 об/мин
Tutkal Kazan Motoru Glue Boiler Engine  Двигатель емкости клея 0.18 kw / 900 Rpm-0.18 кВт / 900 об/мин
Trim Freze Trimming Обработка кромки, двигатель 2 X 0,75 kw / 18000 Rpm-2 X 0,75 кВт / 18000 об/мин
Palet Motoru Pallet Motors Двигатель подающего конвейера 1.1 kw / 900 Rpm-1.1кВт / 900 об/мин
Makinenin Uzunluğu Machine Length Длина станка 2600 mm
Makinenin Genişliği Machine Width Ширина станка 800 mm
Makinenin Yüksekliği Machine Height Высота станка 1500 mm
Makinenin Ağırlığı Machine Weight вес станка 600 kg-600кг

 

Invalid Displayed Gallery